Keep the line moving and everyone clear of it
A stopped line is money burning by the minute, and the causes usually gave warning — the jam building up, the bearing running hot, the forklift path crossing a walkway. A Wendy unit watches the spots you can’t staff and gives your team the heads-up while it’s still a small fix.
- Minutes
- from problem to heads-up
- One
- person covering several watches
- Zero
- tie-in to your plant network
What it watches for you
Catch the jam before the stoppage
Buildup, spills, and snags show themselves before the line stops. The unit flags them early so a two-minute clear-out replaces a two-hour restart.
Keep people and machines apart
It watches the crossings where forklifts, robots, and people share space — and sounds off the moment someone steps where they shouldn’t.
Cover the hot work without tying up a person
Welding and cutting need a fire watch long after the torch stops. One person can cover several jobs with the unit keeping eyes on each, so the rest of the crew stays on the wrench.
Mind the corners of the plant nobody visits
The back warehouse, the roofline, the tank farm behind the fence — spots nobody walks past get the same round-the-clock attention as the main floor.
No fuss. No feeds leaving site. No babysitting.
Made for the heat and the grit
Dust, vibration, and swings in temperature are what it’s built for. It stays on the job where conditions are worst — down to 40 below.
Works with no signal
Remote wellhead or a mine with no bars? It keeps doing its job on its own and speaks up the moment it can.
Stays on your property
What it sees never leaves your site. No feeds shipped off, nothing shared, nothing sold.
Its own island
It never touches your corporate network or control systems, so there’s no IT project, no integration, and nothing for your security team to lose sleep over.
Arrives ready to work
The trial shows up as a complete kit — camera included. Mount it, power it, and it’s on shift the same afternoon.
Looks after itself — still in view
No minder needed: it runs on its own, day and night. And when there’s a signal, your control room can look in any time and see exactly what it sees.
See it working on your site
Tell us about your manufacturing operation and what keeps you up at night. We’ll walk you through exactly how the unit would help — no pressure, no jargon.